RS3 & TTRS CHASSIS & SUSPENSION
RS3 SPORT SPRINGS
Our Sport Springs are our worldwide best-seller. Little wonder, as with all the development we put it, your car will still ride beautifully yet with a ride-height dropped by around 20-25mm. In other words, just how it should have come from the factory!
VWR3130RS
TRACKSPORT COILOVER SYSTEM
VWR34 0000 G7
Quite simply the ultimate coilover suspension kit on the market for anyone serious about their track driving. Taking every bit of our race experience, TrackSport brings all of the features we use on the racecars: coilover rear, inverted front damper, lightweight aluminium bodies, 60mm linear springs, top mounts and droplinks. Nothing but the best.
RS3 REAR BODY BRACE
VWR8130S3 Audi RS3 Sportback 8V
VWR8130S3-SEDAN Audi RS3 Sedan 4 door 8V
Want to sharpen up your handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. For Audi RS3 8V 5-door Sportback and 4-door sedan models.
RS UNDERBODY TUNNEL CHASSIS BRACE
VWR810005
NEW!
Our new MQB Billet Underbody Rear Brace replaces the thin stamped-steel OE tunnel brace with an intricately machined aluminium replacement. The result? Improved body stiffness and importantly much better exhaust clearance.
RS FRONT SUBFRAME BRACE
VWR810006
Want to sharpen up your handling responses? The RacingLine MQB & MQB 'evo' Billet Front Subframe Brace precisely bolts up to help fight subframe flex. This improves rigidity to help protect the car's dynamic responses under hard loading.
TWIN DOGBONE INSERTS
for LOWER ENGINE MOUNT
VWR150003 / VWR150004
The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your car. By fitting both Twin Dogbone Inserts into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.
PROPSHAFT BEARING ALIGNMENT
VWR810009
Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment, protecting the bearings and bushings for the long-term - even under the demands of high power and heavy launches.
ADJUSTABLE CAMBER REAR CONTROL ARMS
VWR501001
The RacingLine Adjustable Camber Rear Control Arms are ultra-stiff replacements to allow you to easily and precisely set the rear camber correctly. Especially important for lowered cars, where the factory adjustment will no longer allow enough correction.
ADJUSTABLE DROP LINKS
VWR420000 / VWR420001
If you’ve lowered your car, our Adjustable Drop Links are an essential upgrade to zero the pre-load on your anti-roll bar geometry, plus add stiffness and precision by replacing the stock rubber joints with ball joints.
BILLET REAR SUBFRAME INSERTS
VWR502000
NEW!
The Rear Subframe Inserts fill the large voids in the factory rear subframe mounts with four billet inserts, limiting movement for greatly improved responses from rear suspension and differential, ensuring sharper cornering dynamics.
STUD & NUT KIT
VWR630000 / VWR630001
Remove and refit your wheels all the time? Our Stud & Nut kit gives a stronger fixing method than using the original wheel bolts. Plus they're a much quicker method to swap wheels for motorsport / track use as well.
HALDEX MAGNETIC SUMP PLUG SET
VWR180002
Our RacingLine Haldex Magnetic Plug Set attracts and separates out the minute abrasive and ferrous metal particles in your Haldex’s lubrication system, reducing the sludge that blocks the filter. Protect your AWD system and keep it operating like it should with this simple cost effective upgrade.
AWD DIFFERENTIAL MAGNETIC SUMP PLUG
NEW
VWR180003
RacingLine’s Magnetic AWD Differential & Transfer Box Oil Plug set protects your AWD car’s differential's lubrication system by attracting and separating out the minute abrasive and ferrous metal particles that are carried by the oil. For 'Haldex' AWD cars this plug set fits both front Transfer Box and Rear Differential.
