top of page

2.0 TSI OIL COOLER FOR MQB and MQB EVO GOLF R, GOLF GTI, S3, TT, LEON, OCTAVIA WITH EA888.3 AND EA888.4 ENGINES.
VWR18G700

RacingLine 2.0 TSI Oil Cooler

2.0 TSI Oil Cooler
For EA888 gen.3 & gen.4 engines

Because cooler oil means a better protected engine.

The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine.

RacingLine 2.0 TSI Oil Cooler

Why fit an
Oil Cooler Kit?

Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.

The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 - 20  degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.

As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

Supplied as a complete kit with every part ready for install.

Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB 'Evo' 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.

 

Adding power to these 2.0 TSI engines generates more heat to disperse.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.

45869733371_f161c7ce2e_o_edited.jpg

HIGH EFFICIENCY COOLER

Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminium pressed plates. Heat dissipates as cold air moves across the plates.

RacingLine 2.0 TSI Oil Cooler

PRESSURE CONTROL

Our unique sandwich plate oil take-off includes a clever internal pressure-control valve control to direct oil flow through the cooler at correct flow/volume.

RacingLine 2.0 TSI Oil Cooler

PRECISION MACHINED

Precision machined billet components utilising

the latest 5 Axis CNC machines for perfect accuracy, first time, every time. 

RacingLine 2.0 TSI Oil Cooler

210 SERIES BRAIDED HOSE

Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience. Protective external sheath avoids any rubbing damage in use.

 

RacingLine 2.0 TSI Oil Cooler

COLD AIR LOCATION

The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funnelled out efficiently.

LR%20Oil%20Cooler%20Kit-Filter%20copy_ed

HIGH-FLOW FILTER

The kit includes a pretty special high-flowing oil filter. Made from stainless steel micronic filter cloth with magnetic pre-filtering, capable of flowing 5x more oil than the factory paper filter.  

 

RacingLine 2.0 TSI Oil Cooler
CONFIRMED APPLICATIONS

VWR18G700

>
VW Golf 8 GTI
2020+
>
VW Golf 8 GTI Clubsport
2020+
>
VW Golf 8 R
2020+
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S3 8Y
2020+
>
Audi A3 2.0 TSI 8Y
2020+
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 3 8S
2014+
>
Audi TTS 2.0 TFSI 8S
2015-2021
>
Audi TT 2.0 TFSI 8S
2014+
>
Audi TTS 2.0 TFSI 8S 320ps (EA888.4)
2021+
>
Audi SQ2
2018+
>
Cupra Leon IV FW
2020+
>
SEAT Leon III Cupra 5F
2014-2020
>
SEAT Leon III 1.8 TSI 5F
2014-2020
>
Cupra Formentor
2020+
>
Cupra Ateca
2018+
>
Skoda Octavia IV vRS 2.0 TSI 245ps NX
2020+
>
Skoda Octavia III vRS 2.0 TSI 5E
2014-2020
>
Skoda Superb III 1.8 / 2.0 TSI 3V
2015+

NOTE: 2015 AND OLDER CARS MAY ALSO REQUIRE FITMENT OF VWG PART 06L115678Q (A PLASTIC OIL STEM INSERT). THIS IS A RUNNING UPGRADE FROM VWG DEALERS SO MOST CARS WILL HAVE HAD THIS PART UPDATED DURING EARLIER OIL CHANGES.

So what's in the 
oil cooler kit?

RacingLine 2.0 TSI Oil Cooler

AN10 210 series Nylon braided feed and return line.

Oil cooler mounting brackets 

Billet CNC non-return sandwich plate.

Billet oil filter housing with removable drop in filter.

Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins.

AN10 10-row oil cooler core.

RacingLine 2.0 TSI Oil Cooler

As you’d expect, the RacingLine Oil Cooler is a beautifully detailed complete kit, developed exclusively for the EA888.3 & .4 engine.

 

The system is designed for straightforward fitting and ultimate reliability. Everything needed for perfect fitment is included. 

Unlike some oil cooler kits, with the RacingLine Performance kit there is no need to remove the intake manifold to access oil galleries for a feed in and out of the engine.

Our clever oil filter adapter enables the oil cooler sandwich plate to be installed underneath the current oil filter housing on the EA888.3 & .4 engines - just screw off and replace.

This sandwich plate includes an integral pressure relief valving system to protect the system from pressure spikes.

10 row stacked-plate oil cooler radiator, flowed to obtain maximum heat dissipation without undue pressure drop.

Optimum front mounted location behind front lower grill aperture with all necessary brackets and fixing kit supplied.

210 Series stainless steel, nylon braided feed and return lines run past the chassis leg into the bumper cavity, then connecting to the oil cooler core. 

RacingLine 2.0 TSI Oil Cooler for Golf mk7 R and GTI

Precision engineered for
perfect performance.

Left-hand threaded oil filter housing top for easy (and clean) oil changes

Stainless steel micronic high-flow filter included in each kit. Supplied separately for oil changes

T6 6061 CNC aluminium used throughout for precision accurate fit

Billet gloss-anodised for long-lasting protection and good looks

Adaptor plate locates under oil filter with pressure-control valving to divert oil flow around new cooling system

LR Oil Cooler Kit-13 copy_edited.jpg
RacingLine 2.0 TSI Oil Cooler
Bracket options.

The kit comes supplied with two bracket kits. One kit is for Audi S3 8V models, the other is for all other MQB & MQB 'Evo' vehicles.

Mounting for the bracket set requires drilling bolt holes through the front crash bar.

GOLF 7 OIL COOLER BRACKET.jpg

MQB & MQB 'EVO'
MOUNTING

S3 OIL COOLER BRACKETS 2.jpg

AUDI S3 8V MOUNTING

Heading 2

The oil filter.

The Oil Cooler Kit includes a pretty special oil filter. The filter element is made from high-flow stainless steel micronic filter cloth – a medical grade material guaranteed to filter out oil contamination better than paper-based filters, all helping to avoid the risk of resultant engine damage. 

5 times the flow of comparable paper oil filters

Consistent filtering across entire filter surface

Magnetic prefiltering to remove microscopic ferrous materials before they reach the filter itself

The filter itself is a lifetime filter, IF it is very carefully cleaned (see below). 

 

However, if you have any doubts about the cleaning process, the filter is available separately from all RacingLine dealers for servicing. If in doubt about cleaning method, it is always best-practice to change filter with every oil-change.

Oil filter for RacingLine 2.0 TSI Oil Cooler
Method of Inspection and Filter Cleaning.

Firstly the RacingLine oil filter housing has a left hand threaded cap. Using a 32mm socket, remove the cap section (leaving the lower section in place) then remove the filter element ready for cleaning (use a syringe to extract remaining oil). Before beginning the cleaning process, first inspect the filter for debris, any debris will be caught on the outside of the filter element and on the magnet. 

 

Clean the reusable stainless steel element with aerosol brake cleaner, solvent or degreasing agent. If you have an airline, carefully blow air through the filter. (Do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution.

 

If you don’t have an airline, let the element air dry. It is also good practice to clean the inside of the filter housing using the same type of cleaner as used on the filter before reassembly.

Please remember: if in any doubt about the cleaning process, do not risk the health of your engine! Replacement filter units are available from all RacingLine dealers.

Note: newly built engines.

RacingLine does not recommend immediate installation of the 2.0 TSI Oil Cooler kit on a newly rebuilt engine (non-factory rebuilds) . Due to the high filtration capabilities of the Stainless Steel Oil Filter, the assembly chemicals typically used by performance engine builders such as Molybdenum paste, engine assembly lube and grease used during engine assembly will be carried in the oil and can restrict filter flow or even lead to it blocking. 

Once a minimum running in period of 1000 miles (1600Km) is complete on a freshly rebuilt/assembled engine, followed by a full oil flush and change (using VWG approved oil), the Oil Cooler kit can then safely be installed. The RacingLine Oil Filter should then be inspected and thoroughly chemically cleaned after a further 1000 miles.

 

Once the Racingline 2.0 TSI oil cooler kit is installed we recommend the Stainless Steel Oil Filter to be replaced or inspected and cleaned at 5000 mile service increments and alongside the vehicle's normal service milage.

High-performance
tuning by RacingLine.

RacingLine Performance Software is simply the most effective modification you can make to a modern turbocharged engine.

 

We take a pretty unique approach. We don't just over-write the existing software.  Instead we take the manufacturers' philosophy and create a complete new calibration designed from scratch exclusively for each model. All developed in perfect harmony with our world-renowned Performance Parts range.

What does that mean for you? It makes for safe, smooth but above all FAST calibrations.

That's what makes the RacingLine difference.

RacingLine OEM+ remap performance tuning software for VW Audi Seat Cupra Skoda Golf GTI Golf R Polo GTI tuning Audi S3 RS3 TTRS SEAT Cupra Leon Formentor Skoda Octavia, vw tuning company, vw modifications,whats best tuning company for vw

Get Started.

click on your      
car brand above.

OTHER PRODUCTS TO SET YOUR PULSE RACING.
2.0 TSI Oil management system

OIL MANAGEMENT SYSTEM

The most sophisticated oil management system to separate oil and moisture vapours out of your intercooler and intake charge, and protect against oil-surge.

 

STAGE 3 TURBO KIT

Our OEM+ Stage 3 upgrade offers a complete, turn-key package that is entirely usable on a daily-driven car yet offers devastating performance just one squeeze of the throttle away.

RacingLine performance intercooler

PERFORMANCE INTERCOOLER 

Our giant sized, high efficiency front mounted intercooler is an essential upgrade to keep intake temperatures low - and keep power levels high.

bottom of page