top of page
VW MQB 'Evo' 2.0 TSI EA888 gen.4 High Performance Intercooler

Purpose-designed for the 2.0 TSI MQB 'Evo' engine, this is the largest-volume intercooler available for this platform.
 

MQB 'Evo' 2.0 TSI EA888 gen.4
High Performance
Intercool
er
& Boost Hoses.
for VW, Audi, Cupra, Skoda models
VWR141
000

MQB 'EVO' 2.0 TSI EA888 GEN 4 High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000

What
it does.

The factory intercooler on the 2.0 TSI MQB 'Evo' has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar.

Our massive 'plate & bar' Intercooler System uses a huge 70mm core to give a 96% volume increase over the factory cooler - making it the largest volume and best performing intercooler upgrade on offer for the 2.0 TSI gen.4.

By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler.

Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. 

Increased 70mm inlet and outlet sizes allow for higher flow versus the 60mm factory outlets, with matching Boost Hoses provided with the intercooler kit.

Unlike most aftermarket intercoolers listed for the MQB 'Evo' platform, ours has been designed exclusively for the 2.0 TSI Gen.4 from the ground-up.

MQB 'EVO' 2.0 TSI High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000

MAXIMUM CORE SIZE

The massive 'plate & bar' intercooler unit features a 70mm high-speed core using extra tall internal tubes for maximum boost flow and a massive 96% increase in volume.

MQB 'EVO' 2.0 TSI High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000

BOOST HOSES INCLUDED

Internally-wired OEM fitment 70mm boost hoses are included, multi-ply to resist heat deformation and burst pressure. Supplied with stainless steel Mikalor-brand clamps.

MQB 'EVO' 2.0 TSI High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000

FLOWED END TANKS

Cast construction end tanks for minimal turbulence and restriction use internal flow guides to divert airflow up and down across the entire core depth, with enlarged 70mm inlet & outlet.

MQB 'EVO' 2.0 TSI EA888 GEN 4 High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000
Keep it 
Cool.
Confirmed applications.

2.0 TSI MQB Evo / EA888 Gen 4 engines only

VWR141000

>
VW Golf 8 GTI
2020+
>
VW Golf 8 GTI Clubsport
2020+
>
VW Golf 8 R
2020+
>
VW Arteon 2.0 TSI EA888.4
2020+
>
VW Arteon R 2.0 TSI 320ps
2020+
>
VW T-Roc R 2.0 TSI EA888.4
2021+
>
VW Tiguan II 2.0 TSI 245ps
2021+
>
VW Tiguan II R 2.0 TSI 320ps
2020+
>
Audi S3 8Y
2020+
>
Audi A3 2.0 TSI 8Y
2020+
>
Audi TTS 2.0 TFSI 8S 320ps (EA888.4)
2021+
>
Audi TT 45 TFSI 8S 245ps (EA888.4)
2021+
>
Audi SQ2 (facelift EA888.4)
2021+
>
Cupra Leon IV 300 TSI FW
2020+
>
Cupra Leon IV 245 TSI FW
2020+
>
Cupra Ateca 300ps (EA888.4)
2021+
>
Cupra Formentor 310ps
2020+
>
Cupra Formentor 245ps
2020+
>
SEAT Tarraco 2.0 TSI 245ps
2021+
>
Skoda Octavia IV vRS 2.0 TSI 245ps NX
2020+
>
Skoda Superb III 3V 2.0 TSI (facelift EA888.4)
2021+
>
Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4)
2021+

Precision Engineered for
Perfect Performance.

Giant core volume of 19,404,000mm³ vs 9,895,200mm³ for the factory cooler core

Internal flow guides to optimise internal air flow via cast end-tanks

Sophisticated 'Plate & Bar' construction outperforms the cheaper, less-effective 'Tube & Fin' construction

Multi-ply, reinforced Boost Hoses are moulded with internal steps to maximise laminar airflow

Intercooler outlets are 70mm vs 60mm for the OE cooler for increased flow

MQB 'EVO' 2.0 TSI EA888 GEN 4 High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000
MQB 'EVO' 2.0 TSI EA888 GEN 4 High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000

OEM

RacingLine

20.5°C

REDUCTION

tempature graph

Intercooler
Performance.

It's all about air intake temperatures.

The OEM factory intercooler on the 2.0 TSI MQB 'Evo' struggles with containing the all-important air intake temperatures, especially once power is upgraded.

So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour.

With a 70mm core-depth (vs 60-65mm for most other aftermarket intercoolers) and giant internal volume, the RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run.

MQB 'EVO' 2.0 TSI EA888 GEN 4 High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000

Intercooler 
fitment.

To accommodate the giant size of the RacingLine Intercooler, some light trimming of the black plastic radiator carrier is required.

This trimming is minimal on popular models such as the Golf mk8, but more may be required on some other MQB 'Evo' models.

For reference, fitment is designed for radiator carrier – 

VW Part No. / 5H0 805 588 J

MQB 'EVO' 2.0 TSI High Performance  Intercooler. for VW, Audi, Cupra, Skoda models  VWR141000

2.0 TSI
EA888 gen.4 tuning.
Simos 19.6 and 19.3

Other products to set
your pulse racing.

R600 COLD AIR INTAKE

Simply the most sophisticated cold air intake on the market - for all MQB Evo platform cars using the 2.0 TSI gen.4 engine.

 

GROUP C 1-Quick Preset_2303x1594 copy.jpg

Smooth the airflow path between intake and turbo for great power and efficiency gains. For all Continental 300/310/320 models. 

TURBO INLET: 300-310ps

GROUP GARRETT.jpg

TURBO INLET: 245ps

Replace the restrictive plastic factory turbo inlet elbow with this High Flow Turbo Inlet for all 245ps (Garrett) models and free up your intake's potential.

bottom of page