TRANSFORM THE DRIVE
Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges.
LOWER MOUNT
For road cars, we recommend just the Uprated Lower Engine Mount for the perfect compromise
EXTENSIVE DEVELOPMENT
Careful development of the durometer (stiffness) rating of the polymer used, meaning less compromise on NVH.
MATCHED SET
High-powered, track or hard-driven cars, should have the full Uprated Mount Set as the ultimate choice.
ADD STRENGTH
Essential upgrade for modified cars to keep the drivetrain properly located.
MQB DOGBONE
MQB-platform Lower Mount kit includes a billet aluminium Torque Link, as the factory pressed steel part lacks the stiffness needed.
WHAT
THEY DO.
To harness your power increases, and transfer that power to the track where you need it, our Uprated Drivetrain Mounts will give a much more solid drive, and crucially add durability to any high-powered or hard-driven car.
The whole engine and gearbox (the drivetrain) is located in just three places. The two upper mounts support the entire weight of the engine/gearbox, plus a third Lower Mount underneath the engine.
Our Uprated Drivetrain Mounts are a CNC-machined, fully engineered replacement set of three mounts designed to greatly decrease engine and transmission movement, ensuring clean transfer of power to the track.
The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages.
Available as a Lower Mount only for fast road use, and a full set of 3 Drivetrain Mounts for track/
dragstrip/very high power cars.
DO I NEED
UPRATED ENGINE MOUNTS?
OK, these Mounts aren't the most visible or sexy of modifications. But for those in the know, with high-power cars or who use their car regularly on track, our Uprated Engine Mount Set is truly one of the most worthwhile upgrades to the driving dynamics of their car. Suitable for either DSG or manual cars.
The Uprated Full Set of Engine Mount stiffens the whole location of the drivetrain greatly to give a much tighter, sharper feeling to your car. It removes the loose feeling when coming on and off-throttle during aggressive gearchanges, and banishes wheel-hop under hard acceleration as the whole engine and 'box assembly judders.
This adds strength to the drivetrain, helping to protect from future wear and breakages. Rather than some aftermarket 'push in' bushes which crudely fill the voids in the original factory mounts, the RacingLine mounts are a completely redesigned replacement mount assembly and torque link.
Make no mistake, the full uprated engine mount kit is a relatively extreme modification to make to your car. Naturally, more noise from the drivetrain comes into the cabin (and more than when the Lower Engine Mount only is fitted), but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys. Allow a few hundred miles/kms of driving for the mount to settle in after installation.
LOWER
MOUNT.
For most hard-driven road cars, we recommend starting with the Lower Mount only. You can always add the two upper engine and gearbox mounts at a later stage.
A lot the fore/aft movement in the drivetrain is controlled by the Lower Mount - meaning that changing it alone makes a big difference to your drive.
The additional two upper mounts add more strength, but also add in more NVH (noise, vibration, harshness).
Our A5-platform mount (think Golf 5/6/Scirocco/S3 8P etc) is a two-piece unit pressed into the subframe. It's a clever dual-durometer design, and features a cut-out to clear bigger roll-bars on the 4WD cars.
The MQB & MQB 'EVO' platform Lower Mount also includes a billet aluminium Torque Link. Our testing showed that the pressed steel part used on the MQB-platform cars lack the stiffness needed.
New: the lower mount is now available for aluminium subframe MQB & MQB 'evo' cars - such as Golf 8, Audi S3 8V & 8Y, Audi TT.
PRECISION ENGINEERED FOR PERFECT PERFORMANCE.
The mounts and torque link start life as a billet of T6061 Aluminium.
Our polymer mix of different durometer (hardness) ratings which allow some compliance, yet filters much of the drivetrain's vibration.
Available for MQB 'evo', MQB and A5-platform cars.
Meticulously machined
with the latest CNC technology.
CONFIRMED APPLICATIONS
MQB & MQB 'evo' 2.0 TSI MODELS
WITH ALUMINIUM SUBFRAME
VWR15G701
Transmission Mount
VWR15G702
Engine Mount
VWR150002
Dogbone and Subframe Mount
> | VW Golf 8 GTI | 2020+ |
> | VW Golf 8 GTI Clubsport | 2020+ |
> | VW Golf 8 R | 2020+ |
> | VW Arteon R 2.0 TSI 320ps | 2020+ |
> | VW T-Roc R 2.0 TSI | 2019+ |
> | VW Tiguan II R 2.0 TSI 320ps | 2020+ |
> | Audi S3 8Y | 2020+ |
> | Audi A3 8Y | 2020+ |
> | Audi S3 8V | 2013-2020 |
> | Audi A3 8V | 2013-2020 |
> | Audi TT 3 8S | 2014+ |
> | Audi TTS 2.0 TFSI 8S | 2015-2021 |
MQB 2.0 TSI MODELS
WITH STEEL SUBFRAME
VWR15G701
Transmission Mount
VWR15G702
Engine Mount
VWR15G703
Dogbone and Subframe Mount
> | VW Golf 7 & 7.5 GTI & Clubsport | 2013-2020 |
> | VW Golf 7 & 7.5 R | 2013-2020 |
> | VW Passat 2.0 TSI B8 | 2015+ |
> | VW Arteon 2.0 TSI | 2017+ |
> | VW T-Roc 2.0 TSI 190hp | 2017+ |
> | VW Tiguan II 2.0 TSI | 2016+ |
> | VW Jetta / GLI 7 | 2018+ |
> | Cupra Leon IV FW | 2020+ |
> | SEAT Leon III Cupra 5F | 2014-2020 |
> | SEAT Leon III 5F | 2015-2020 |
> | Cupra Formentor | 2020+ |
> | Cupra Ateca | 2018+ |
> | Skoda Octavia IV vRS 2.0 TSI 245ps NX | 2020+ |
> | Skoda Octavia III vRS 2.0 TSI 5E | 2014-2020 |
> | Skoda Superb III 3V | 2015+ |
'A5 PLATFORM' 2.0 TFSI EA113 MODELS
VWR15G501
Transmission Mount
VWR15G502
Engine Mount
VWR15G503
Subframe Mount
> | VW Golf 5 GTI | 2005-2008 |
> | VW Golf 5 R32 | 2005-2008 |
> | VW Golf 5 GTI ED30/Pirelli | 2006-2007 |
> | VW Golf 6 GTI | 2009-2014 |
> | VW Golf 6 R | 2009-2014 |
> | VW Scirocco R | 2009-2017 |
> | VW Jetta / GLI 5 | 2005-2011 |
> | VW Jetta / GLI 6 | 2011-2018 |
> | Audi S3 8P | 2006-2012 |
> | Audi A3 8P | 2003-2012 |
> | SEAT Leon II Cupra/R 1P | 2006-2012 |
> | SEAT Leon II 1P | 2005-2012 |
> | Skoda Octavia II vRS 1Z | 2004-2013 |
High-performance
tuning by RacingLine.
RacingLine Performance Software is simply the most effective modification you can make to a modern turbocharged engine.
We take a pretty unique approach. We don't just over-write the existing software. Instead we take the manufacturers' philosophy and create a complete new calibration designed from scratch exclusively for each model. All developed in perfect harmony with our world-renowned Performance Parts range.
What does that mean for you? It makes for safe, smooth but above all FAST calibrations.
That's what makes the RacingLine difference.
OTHER PRODUCTS TO SET YOUR PULSE RACING.
ADJUSTABLE DROP LINKS
If you've lowered your car, the VWR Adjustable Drop Links allow you to readjust the preload on your anti roll bar and add precision to handling response.
Simply the ultimate suspension kit. Sharing most components with our Full Race kits, they feature full coilover layout with shortened aluminium bodies.
TRACKSPORT SUSPENSION
STUD & NUT KIT
Make swapping wheels easy with our beautiful lightweight stud and nut conversion kit.
